- *** Forbidden. Sender blacklisted. Anti-Spam by CleanTalk. ***
EnerGenie USV mit AVR, 650 VA – EG-UPS-001
Kenmerken USV mit 650 VA und modifizierter Sinuswelle Automatische Spannungsregelung (AVR) Intelligenter Überspannungs-, Überlast- und Kurzschlussschutz Visuelle und akkustische Alarmsignale LED-Statusanzeige Intelligentes Batteriemanagement und Über- und Entladeschutz Zur Wandmontage geeignetSpecificatiesTyp line-interactiveSchwingungsverlauf Sinus (Netzstrom), Sinus modifiziert (Batterie)Eingangsleistung 220 V AC ± 25%, 50 / 60 Hz ± 10%Ausgangsleistung 220 V AC ± 10%, 50 / 60 Hz ± 1% (220 V AC ± 5 % im invertierten Modus)Schaltzeit weniger als 10 msBackup-Zeit 10 bis 30 Minuten (abhängig von der Auslastung)Batterie sealed lead-acid 12 V DC / 7AhLadezeit bis zu 12 Std.Steckplätze 1 x C13 (Eingang), 4 x Schuko (Ausgang)Betriebsbedingungen 0°C~40°C, Raumfeuchtigkeit 20~90%RH nicht kondensierendStrom 650 VA (390 W)Ladestrom bis zu 1.2 AGeräuschentwicklung < 45 dB bei 1 m AbstandAbmessungen 280 x 185 x 95 mmGewicht 4.5 kgSystemeisenIn order to work correclty, the connected load should be at least 5% of the maximum capacity of the UPS. For example, a 700 W UPS needs at least a connected load of 35 W to work.InhoudUSVNetzkabelBenutzerhandbuch
En stock
€43.38
En stock
- Filament, Imprimantes 3D, Informatique
Gembird3 Filament HIPS Orchid 3 mm 1 kg 3DP-HIPS3-01-OR
KenmerkenHIPS filamentMaintains strength in high-impact applicationsEasily moldable, good dimensional stability and low volatilitySuitable for use in a variety of 3D printersCan be easily glued and paintedSpecificatiesMaterial HIPS, 3 mm diameterWeight 1 kg/spool (2.2 lbs)Length approx. 140 mDensity at 21.5?C 1.04 g/cm3Melt Flow Index at 10min, 2.16kg 4Melt Point 225 – 240 ?CHeat-Deflection-Temperature at 0.455 MPa 7 ?CYield Strength at 5mm/min 80 – 90 MPaImpact Strength 10 KJ/m2Ensile Break 55 %Diameter 3.00± 0.05 mmSpool dimensions 165 mm diameter x 100 mm height x 40 mm central holeSystemeisenA 3D printer with 3 mm extruder of temperature around 230 ?, suitable for HIPS filamentDo not remove 3D printed parts until they are fully cooled down
SKU: 39660